Self lubricating Bearings

Your position is:Home > Products > Self lubricating Bearings

We offer a complete line of selflubricated bronze products with special embedded solidlubricant plugs. The bronze allows the bushing to withstand high loads and thesolid lubricant plugs allow for self-lubrication. This Series excels withoutprelubrication under severe conditions of high or low temperatures with lowspeeds. The overall material combination provides a maintenance-free bushingsolution, particularly for applications with high loads and intermittent oroscillating motion.They are manufactured from a varietyof bronze alloys including Aluminum Bronze C95400, Bearing Bronze C93200(SAE660,RG7)and Manganese Bronze C86300.We also makesolid-lubricant-inlaid bearings like (JDB,JDB650,JTW,JSP,JSL,SPB,SPW,OILLES 500,SOBseries),They are also called Bronze Geitlager, Gleitelemente und Gleitlager, Gerollte Bronze-Gleitlager,Gleitlager aus BronzeGleitlager-Buchsen,gerollte Trockengleitlager, bussole autolubrificanti in bronzo,BOCCOLEAUTOLUBRIFICANTI PER GUIDE A, Boccole autolubrificanti CILINDRICHE eFLANGIAT, autolubrificanti in bronzo grafite,boccole in bronzo,Boccole Bushes,Boccolein bronzo autolubrificanti sinterizzate ,Boccole in ferro cilindriche,Boccolein ferro autolubrificanti sinterizzate, glidlager-bussningar, glidlager / bussningar i lagerbrons,Glidlager ärett lager,bronsbussningar, gummibussning.it is no problem for us to makebushings, plates, flange bearing, washer,and so on. Thefollowing is a list of benefits our graphite has to offer:

·   It iscompletely oil-less

·   It isself-lubricating

·   Maintainsexcellent lubricity and structural integrity in all environmental conditions

·   May be usedwhile continually immersed in liquids

·   Holds up underthe most extreme temperatures, exceeding 1200 degrees Fahrenheit and well belowfreezing

·   There are noknown acids or alkaloids contained, which could have a corrosive effect onequipment

·   Designed forlongevity

 Environmentally safe!

REQUEST A QUOTE

DO YOU HAVE A QUESTION?

RCB600 Bronze Machining Bushings

We are manufacturing Bushings from 50 gmsto 3000 kgs in single piece.

The following is the common material:

Tin Bronzes      C90300   C90500    C90700 
Leaded Tin Bronzes      C83600    C92200   C92900    C93200(SAE660)   C93700(SAE64) 
Manganese Bronzes      C86200    C86300   C86500 
Aluminum Bronzes      C95200    C95400   C95500 
Lead-free Bronzes      C89833    C89320


  • Read More..

    RCB650(C86300,CuZn24Al6Fe3Mn4,SAE430B) Basically general-purpose products, suitable for various circumstances Including high or low load,high or low temperature, with oil or oiless lubrication, or even In the water. With it's matrix made of high strength brass, It's hardness doubles than normal bronze bushings and the wear performance improves in large degree, so it is applicable for continue pitching machine, converors of metallurgy industry. It could also be used in plastic injection machines, in the automatic switch of high-tension electricity, in the luffing and surporting parts of construction machines, hydraulic gate supporter, pulley, drive wheels of water control project, and also for drying tunnel of paper machines, auto die, sliding parts for ships unmooring etc. 

     

  • RCB-JLP
  • RCB-JNP
  • RCB-JMP
  • RCB-JUP
  • RCB-JWP
  • RCB-JFF
  • RCB-JFE
  • RCB-JFD
  • RCB-JFC
  • RCB-JSLB
  • RCB-JEGB/RCB-J...
  • RCB-JGBF
  • RCB-JGB
  • RCB-JDBB
  • RCB-JDBS
  • RCB-JNA
  • RCB-GBW/GB250
  • RCB-DGBZ
  • RCB-DPRP/DPRPR...
  • RCB-DCBSP/DCBS...
  • RCB-DCBS/DCBSL
  • RCB-DSPW/DSPS
  • RCB-39D 863
  • RCB-DPGPC
  • RCB-JESW
  • RCB-JSL
  • RCB-JSP
  • RCB-JTW
  • RCB-JFB
  • RCB650
  • RCB650S1(CuSn5Zn5Pb5,C83600):It has a backing made of tinbronze with particular formulation supported by certain angle and density. Thesolid lubricants inlaid in the bushing are compounded with precision. It's usedin common situation, such as light industry, machine tool industry, dryingfurnace rolling way, fireplace door etc.

    RCB650S2(CuAl10Fe5Ni5):It has a backing made ofaluminium bronze with particular formulation supported by certain angle anddensity. The solid lubricants inlaid in the bushing are compounded withprecision. It's used in medium load, high temperature, medium speed situation.

    RCB650S3(CuSn12):The basement of this product is tin bronze, it has a special fillingof prescription of solid lubricant inserted with a certain angle and densityinto the surface and processed with precision finishing. It is mainly used inlow load, high temperature, and medium-speed applications just likearchitecture machinery metallurgy machinery and conveying machinery where thelubricant is not added

    RCB650S5(CuZn25Al5):It has a backing made of high-strength copper alloy with particularformulation supported by certain angle and density. The solid lubricants inlaidin the bushing are compounded with precision. It's used in successive castingmachine, mineral mountain machinery, shipping, steam turbine etc.

    TEL: 0086-573-84616987 0086-573-84612956
    FAX:0086-573-84616977
    ONLINE SERVICE
    • service one
      点击这里给我发消息
    • service two
      点击这里给我发消息
    • international service